FAQ  •  Login

B1414+ Bug Reporting Thread

<<

helpbago

Posts: 1

Joined: Wed Mar 25, 2015 11:59 am

Cars: 2013 VW Jetta SE, 1968 VW Bettle (Baja) 1973 VW SuperBettle

Post Wed Mar 25, 2015 1:38 pm

Re: B1414+ Bug Reporting Thread

Keep getting

---------------------------
Lua Error:
---------------------------
Step() failed!: [string "--client\start scripts\main.lua..."]:35: attempt to index global 'UIDemoImage' (a nil value)

You can CTRL+C on this to report it.
---------------------------
Retry Cancel
---------------------------

While in game, Don't notice it until I ALT+Tab out of the game.
<<

Noncog

Turbocharged
Turbocharged

Posts: 4

Joined: Sat Feb 09, 2013 9:29 pm

Cars: 89 f150 l6 5spd

Post Wed Mar 25, 2015 3:48 pm

Re: B1414+ Bug Reporting Thread

When I was doing the I6 challenge to make the modern sub 2L NA racing I6 no matter what I did it said my total cost was too high to complete the challenge, even when my total cost was below the value defined by the challenge, and when I tried to take an in-game screen-shot with the camera button, the client crashed
<<

schlockie

Posts: 2

Joined: Thu Mar 26, 2015 8:42 am

Cars: Audi TT roadster 270HP
Skoda Fabia TDI 100HP

Post Thu Mar 26, 2015 8:52 am

Re: B1414+ Bug Reporting Thread

---------------------------
Lua Error:
---------------------------
tolua++ dbcall failed!: [string "--client\functional\PlatformDesignerWindowDel..."]:2394: table index is nil

You can CTRL+C on this to report it.
---------------------------
OK
---------------------------

Playing the game since hours. Very well done!
But now it refuses to work. I get freezes when i try to change the names of the car but also in several other situations. Mainly if i try to access my allready built cars in sandbox.

System: I5 4670K, 16Gb Ram , Geforce GTX 780, Asus Maximum ranger Board
<<

schlockie

Posts: 2

Joined: Thu Mar 26, 2015 8:42 am

Cars: Audi TT roadster 270HP
Skoda Fabia TDI 100HP

Post Thu Mar 26, 2015 9:00 am

Re: B1414+ Bug Reporting Thread

---------------------------
Lua Error:
---------------------------
tolua++ dbcall failed!: [string "--client\functional\PlatformDesignerWindowDel..."]:2394: table index is nil

You can CTRL+C on this to report it.
---------------------------
OK
---------------------------
and again. Now while try to insert a engine. By the way. No Matter which car i build with 6 cyl engine in a row. Allways i get the message engine is to big. Even if i build it very small.
<<

RobtheFiend

Supercharged
Supercharged

Posts: 640

Joined: Wed Oct 10, 2012 12:35 am

Location: Sweden

Cars: Opel Astra -99 1.6 16

Post Thu Mar 26, 2015 6:33 pm

Re: B1414+ Bug Reporting Thread

Some bodies cannot fit a straight six, no matter how small.
<<

werth47

Posts: 3

Joined: Fri Mar 27, 2015 3:47 am

Cars: No car.

Post Fri Mar 27, 2015 3:51 am

Re: B1414+ Bug Reporting Thread

Scenario: The Posh Borgan doesn't work. It's missing a 5th requirment. The Car cost less than $8500 but the requirement was not fulfilled. See pic.
Attachments
Missing scenario error.JPG
The Posh Borgan Error
Missing scenario error.JPG (100.05 KiB) Viewed 4755 times
<<

Slim Jim

User avatar

9-Star Beta Tester
9-Star Beta Tester

Posts: 409

Joined: Sun Apr 22, 2012 4:23 pm

Location: New York, USA

Cars: 2006 Honda Accord EX V6 Coupe, 6-speed manual

Post Fri Mar 27, 2015 5:06 am

Re: B1414+ Bug Reporting Thread

The scenario works fine for me (edit: just got gold). What's missing is a string for one of the hints/tips. Has nothing to do with the requirements. What build are you using?
<<

Tycondero

User avatar

Naturally Aspirated

Posts: 235

Joined: Sun Oct 26, 2014 10:36 pm

Post Sat Mar 28, 2015 10:22 pm

Making a new engine variant resets displacement

Using the uploaded engine made for a community challenge (viewtopic.php?f=39&t=6017). I was able to increase the displacement of the engine by creating a new variant (not by cloning another variant, but pressing the button to make a new one from scratch). The engine displacement is then set at 2L instead of the family displacement which was 1.4L. If you then move the variant bore size slider one tick and return it to the maximum setting it will return to the maximum confines of the engine family.

To recreate effect:
-Load the engine
-Watch the displacement of the models and family
-Create a new variant (not by copying an older one)
-Look at the displacement value

-Downscale the variant bore and return to max size limit
-Displacement is now corrected to family engine displacement limits.
Attachments
Engines.zip
(17.39 KiB) Downloaded 239 times
<<

mattp123

Naturally Aspirated

Posts: 1

Joined: Sun Mar 29, 2015 5:28 am

Cars: 1992 Grand Marquis
1972 Cutlass Supreme
2010 Camaro SS

Post Sun Mar 29, 2015 9:09 am

Re: B1414+ Bug Reporting Thread

Seriously just bought the game today and I keep getting the attached notification. The game loads fine up until the menus. When I try to open sandbox or campaign it does nothing, then I alt+tab over to find the notification. Also, anytime I would ever try to alt+tab back to windows, even when using the demo and the hour or so the game was working fine, I cannot get back into the game. I can hear the click as I move the mouse around like it is over buttons, but I cannot see the game and just have to force close it.
Attachments
automation.jpg
automation.jpg (28.17 KiB) Viewed 4735 times
<<

MWisBest

User avatar

Posts: 37

Joined: Wed Mar 18, 2015 2:11 pm

Cars: 2000 Dodge Intrepid ES (3.2L V6)

Post Sun Mar 29, 2015 3:28 pm

Re: B1414+ Bug Reporting Thread

Upon playing with, I think, the fuel injection methods for the I6, I noticed a ton of lag in the UI. I pressed "`" which brought up the console, it's being spammed with:
"Unable to get intake settings for config: INL6"
Here's the engine it is happening on:
EDIT: Changing the 'Configuration' under 'Fuel System' (e.x. Single to Dual, Dual to Throttle Per Cylinder) on any I6 is causing this.
Attachments
I6Scenario5.lua
"WoSSoM" I6 Scenario
(44.67 KiB) Downloaded 232 times
<<

smokyburnout

Turbocharged
Turbocharged

Posts: 12

Joined: Wed Feb 15, 2012 9:26 am

Cars: 2003 Honda Insight 5-Speed

Post Sun Mar 29, 2015 6:01 pm

Re: B1414+ Bug Reporting Thread

Got this message and a few others when trying to put a crazy inline 6 into that new Le Mans body

---------------------------
Lua Error:
---------------------------
tolua++ dbcall failed!: [string "--client\functional\EngineCombustion_Aspirati..."]:350: attempt to index field 'ExhaustPoints' (a nil value)

You can CTRL+C on this to report it.
---------------------------
OK
---------------------------
<<

Killrob

User avatar

Developer - Lead Beta Tester/Producer/German Efficiency Expert
Developer - Lead Beta Tester/Producer/German Efficiency Expert

Posts: 3711

Joined: Fri Mar 11, 2011 1:00 am

Location: Lower Hutt, New Zealand

Cars: I owned a Twingo... totally bad-ass!

Post Sun Mar 29, 2015 8:34 pm

Re: B1414+ Bug Reporting Thread

Do you have that engine and car saved? Could you upload the files? (found in Documents\My Games\Automation\)
<<

Beer

User avatar

Naturally Aspirated

Posts: 22

Joined: Fri Aug 10, 2012 12:35 am

Location: Olesenka. Czech Republic

Cars: Škoda Felicia 1.3MPi (50kW)
Ford Fiesta 1.3 Endura-E (44kW)
Ford Fiesta 1.25 Zetec-SE (55kW)

Post Sun Mar 29, 2015 10:40 pm

Re: B1414+ Bug Reporting Thread

I have same problem with inline 6 into Le Mans body as smokyburnout
Attachments
3,2l LeMans.lua
(6.85 KiB) Downloaded 257 times
Falcon LMS.lua
(23.13 KiB) Downloaded 239 times
error.jpg
error.jpg (28.81 KiB) Viewed 4746 times
<<

frisco557

Supercharged
Supercharged

Posts: 27

Joined: Fri Jan 10, 2014 1:18 pm

Cars: 1999 Honda Civic EX
1991 Mazda Miata

Post Mon Mar 30, 2015 1:40 am

Re: B1414+ Bug Reporting Thread

Beer wrote:I have same problem with inline 6 into Le Mans body as smokyburnout

Inline turbos(4 and 6) have had that problem with that body since it was released as a mod.
<<

Beer

User avatar

Naturally Aspirated

Posts: 22

Joined: Fri Aug 10, 2012 12:35 am

Location: Olesenka. Czech Republic

Cars: Škoda Felicia 1.3MPi (50kW)
Ford Fiesta 1.3 Endura-E (44kW)
Ford Fiesta 1.25 Zetec-SE (55kW)

Post Mon Mar 30, 2015 2:42 am

Re: B1414+ Bug Reporting Thread

so it's appropriate time to fix this bug
PreviousNext

Return to Support

Who is online

Users browsing this forum: No registered users and 2 guests