B1414+ Bug Reporting Thread

[Jakgoe]

\Also, on the car with fins you cant adjust the wheel arches. Again, not sure if this is a bug or intentional due to these adjustments not working well

Yes, this is intentional, and has to do with the wheel covers.

[Route99]

If i design a car with ladder chassis and mid transverse engine, this is what happens:

You probably should mark problem with bright colour.

[vmo]

Superbug: When I place in the side of car a air vent fixture, the fixture cooling is 0.0 Kj/s, and the total (for example) is 1330 Kj/s.

When I increase the size of the vent fixture, the fixture cooling is 0.0 Kj/s, but the total INCREASED (for example, pass from 1330 to 1430), WITHOUT ADD ANY MORE FIXTURE WHEN I LOOKED THIS BUG.

I've tested this with the big supercar central engine in 2014.

P.S: Fix the issue when the Automation is minimized to tray, and you try to resize the game, this blocks.

[8bs]

If i design a car with ladder chassis and mid transverse engine, this is what happens:

You probably should mark problem with bright colour.

The chassis disappears and the wheels too...even though the calculations are maid.

[Drummerdude48]

Superbug: When I place in the side of car a air vent fixture, the fixture cooling is 0.0 Kj/s, and the total (for example) is 1330 Kj/s.

When I increase the size of the vent fixture, the fixture cooling is 0.0 Kj/s, but the total INCREASED (for example, pass from 1330 to 1430), WITHOUT ADD ANY MORE FIXTURE WHEN I LOOKED THIS BUG.

I've tested this with the big supercar central engine in 2014.

This is on the list of things to fix I think having grilles/vents on the bonnet of the car cause this issue.

P.S: Fix the issue when the Automation is minimized to tray, and you try to resize the game, this blocks.

Actually, maybe I should've mentioned this. For the past few updates (not just the beta) the game randomly tabs out and I can't tab back in, it's just a black window and I was playing in fullscreen. If you could fix this, then yeah, that'd be coo.

Yeah that issue has been know for a long long time now (I think there might be a couple threads about it somewhere). Playing in windowed mode prevents it. If I remember correctly, the reason it hasnt been dealt with is because there are constantly more important things to be worked on.

[Dragawn]

Pink is fabulous, but sadly doesn't fit the car.

[Dragawn]

Another bug, although a cool one: when painting your car silver/chrome, save it, and repaint it, the fixtures stay in silver

[Gamerdog6482]

Another bug, although a cool one: when painting your car silver/chrome, save it, and repaint it, the fixtures stay in silver

I bet that makes the price go up by $200 too

[Spock]

Some Graphical things look very bad :-/

Very Old Bug but Still in the latest Build....
http://prntscr.com/4dfr80

The Pipes for the Intercooler O.o
http://prntscr.com/4dfquv

Hmm and why we can not have an Trunk in the Front? The "Smart" has a little "Trunk" in the Front.

Where is my cardan shaft for the Front Wheel drive?
http://prntscr.com/4dfq8p

And what is that stupid black thing in the Middle which i have already seen in Older releases...


The Brakes? O.o
http://prntscr.com/4dfqck


And than there are Some "Missing_Translation" in the German version like in the Transmission Tab and so on...

I hope that the Germans get an Update soon.

[MViking]

Really enjoying the update so a big thanks to the devs.
A couple of problems I have come across in 1410 patch. These are both related to tyres.
1) If you are in an early year (I have found it in the mid fifties and older) when you increase the tyre size it increases to a point and then takes a jump back in size. i.e. 100>105>110>115>110 then it reaches a point where it will no longer increase.

2) Tyres in general don't react well to platform year changes but if you make an extreme change like start in 2014 build a design set the tyres (eg 215/45 R15) then go and change the platform year to say 1974 you go back to tyres and they are now really wide (eg 680/15 R15) and will not return to normal values even if you return the year. I don't know but perhaps this is related to moving the year to one were you should not have that body.

Any way I hope my descriptions can help you find and fix these problems and thanks again for many a frustrated hour tweaking scenario cars trying to get those perfect scores.

[Leonardo9613]

One problem I found on B1410 was the screen scaling, I use my 14" laptop with 1366x768 resolution to play the game. Because of that diminutive screen, I always play the game with 1366x740, so that the window frames are accounted for and I am able to use the remaining screen. However, now the screen accounts for the windows task bar, but insists on calling it the 768p version. I understand this was made to avoid the confusion about the new UI bar, but the pixels I lost are of fundamental importance in my tiny screen.

[Spock]

Clicking at the Multiplayer Button in the Main Menu crashes the Game.

[Kylethelion]

Bunch of bugs from me:

1. Progress bar is misplaced and distorted when starting game in windowed mode


2. Engine name is misplaced with default one in car constructor:

- Open car for edit

- Return to engine editing
- Go back to "Trim" step
- Engine name disappears


3. Exception occurs when user tries to review some engines

Attaching engine file as well:
http://take.ms/zWbbD

4. It's possible to add engine from year 2020 to car from year 1940.
- Select car from older years (i.e. 1940) for review
- Open Trim step
- Tap on "Coose engine" button
- Select engine from year 2020

Observed:
- It's possible step

Expected:
- May be it's a feature request, but I think application should allow selection only from engines which are same year as a car

5. Torque curve variable (as well as Utility variable) is out of border value for engine with torque > 2000NM
- Create a new car
- Select engine with Torque > 2000NM for it
- Check car variables

Observed:
* Utility and Torque curve are -1 value


Expected:
* Value is not out of border

Attaching my engine:
http://take.ms/sPRQK

6. Engine parameters on curve are misplaced in windowed mode (same occurs in full screen mode, but they are not "cutted" this hard)

[statman]

It's a rather request than a bug report, but please turn up the maximum engine (and exhausts) sounds. it used to have a good mix balance back to B1362.
Now I can barely hear the exhaust sounds when the engine is low reving....
Also It would be great if we can adjust engine, ambient, effects and music volume separately.

[Dragawn]

Turbo engine becomes elephant after selecting intake (in engine builder sandbox), (re)selecting (another) fuel type fixes it