Turbocharged
Posts: 167
Joined: Fri Dec 07, 2012 5:18 am
Location: Finland
Cars: Volvo V40 D2 Summum -13
EX:
Saab 9-5 3.0TiD -02
Audi A4 1.9 TDi -97
Toyota Corolla 1.6 -92
Thu Aug 01, 2013 10:39 pm
Bug regarding engine testing & graphics
I found one bug.
1. make some engine
2. go to testing page and to testing mode
3. start engine ja rev it
4. go to some other page (fex. change the block material on bottom end page)
5. get back to testing
Now the diagram which shows the airflow etc has been disappeared. You can get it back by clicking the arrow on the left side of the screen.
Not a big bug but it gets annoying if you try to test best parts for certain applications and have always to click the arrow...
1. make some engine
2. go to testing page and to testing mode
3. start engine ja rev it
4. go to some other page (fex. change the block material on bottom end page)
5. get back to testing
Now the diagram which shows the airflow etc has been disappeared. You can get it back by clicking the arrow on the left side of the screen.
Not a big bug but it gets annoying if you try to test best parts for certain applications and have always to click the arrow...