Naturally Aspirated
Posts: 1178
Joined: Wed Jul 04, 2012 4:29 am
Location: Spain
Cars: A undestructable Toyota with 1ZR FAE engine, Honda Civic VTi EG6, Mazda RX7 fc
1993 DTM [SUBMISSIONS CLOSED. Revising entries]
Today, I had the pleasure to make a new challenge: the 1993 DTM.
The rules for the cars are the Class 1 Touring Cars, and are this (only the suspension, body, and engine are for both race car and street car):
Production car rules:
- -Trim year: 1993.
-Engine year: any year up to 1993.
-Tailights, headlights, handles, blinkers at the sides.
-Max. exhaust loudness: 50.
-Catalytic converter required.
-Race tubular exhaust headers and race intakes FORBIDDEN.
-Only 95 RON or 98 RON Unleaded fuel.
-Minimum reliability (this value is from avg. reliability tab, in the trim overview): 60.
-Minimum safety: 30.
-Maximum cost at Gasmea (1993, +5% benefit): $32.000.
-Max. Wheelbase: between 2500mm and 2800mm.
-Only Front engined cars.
-Only sedans or coupes.
-Maximum cylinders: 6.
-Maximum engine capacity: 2.5L N/A.
-Maximum 4 valve per cylinder.
-The engine must be the same from the production car. This would say that you can't change the bore or stroke, head and valves system, and the block and head materials.
-Naturally aspirated engines only.
-The aero pieces were free below the wheel centreline (this will say that you can only fit a wing or a lip forward the center of the front wheel or rear the center of rear wheel).
-AWD (not 4x4), traction control, power steering and ABS is allowed.
-The suspension struts MUST BE the same from the production car, but you can change the shocks.
-The body, frame, panels and add-ons (headlighs, wings, air vents...) quality slider MUST BE set to 0. The rest of trim sliders are free to use.
-Max exhaust dB: 100.
-Catalytic converter 3-way high flow REQUIRED.
-The aero elements (except rear wing) MUST BE under the wheel axis line: only a rear wing, and 2 lips: one in the front and one in the rear.
-Race Intake only.
-Race exhausts only.
-Minimum reliability: 30.
-Minimum safety: 30.
-Interior trim: the minimum number of seats available in the car body. Basic interior trim.
-Min. weight: 980kg.
-Max. Quality sliders: ANY restriction, except for the fixture and chassis tab (first tab in the car designer).
-The car aero tray must be set to fully clad, and the active aero and cooling IS FORBIDDEN.
-The only mods allowed are the mods that you can find in the Workshop.
-Car tech year: 1993.
-Max. 300 Tyre Width, 18" rim diameter and 660mm wheel, Slick compound and set the quality slider to +10.
To change the material:1. Make your street car, with engine, put the rules name format, save, and export them.
2. Go to documents/my games/automation/export (Steam version), or documents/automation/export, and rename the zip, putting this in the final: for example, if the exported folder is called Montes_T30, add in the final the trim name: in this case, Montes_T30-Road (put the -Road suffix). This step is very important to make well the next steps.
3. Modify the saved (NOT EXPORTED) car and engine in the game. Select a new chassis and frame material..., setup all that you think that is convenient, but accomplishing with the rules, rename according with the rules file format, save and export.
4. Change the zip name like as the step 2, but with the suffix -Race instead -Road.
Sent me both files via PM, in a single message attaching the two in a single *.Zip file, or each trim for message.
Setups for each race:-Before any race, you can sent me via PM the aero values and gear ratio values.
YOU MUST SEND VIA PM the exported race car with engine, and the production car with engine with this name rules:
Road car:
CAR: DTM93-<Username>
TRIM: Road<Company><Model designation>
ENGINE: DTM93-<Username>
Variant: Road-<engine Code>
Race car:
Car TRIM: Race-<Company><Model designation>
Engine Variant: Race-<engine Code>
Race tracks:
- 1. Zolder: http://automationgame.com/phpBB3/viewto ... =36&t=4617
2. Hockenhemiring (in development).
3. Nürburgring GP: viewtopic.php?f=36&t=6165
4. Nürburgring Nordschleife: viewtopic.php?f=36&t=3846
5. Norisring (in development).
6. Avus 1993: viewtopic.php?f=36&t=9452
7. Alemannenring (in development).
Entries.
- -Montes T30 Coupe MRP (vmo).
-Erin Berlose (DeusExMackia).
-SX-1 (lordvader1).
-Bogliq bastion (HighOctaneLove). Pink bug in the non-GTA SA Sultan
-Matoyama Motors YR-4R Stream (marcus817).
-DMW Transeuropa (Burningbridges).
-Smooth Veex (AirJordan).
The submissions are now opened until the 28th February 2016 23:55 hrs.
Company ID: 1940001
Visit the brand models http://automationgame.com/phpBB3/viewtopic.php?f=35&t=3995
In AutomationHub.net: http://www.automationhub.net/company-ca ... mpanyID=18
My YouTube Channel: https://goo.gl/1MtRpd