Lighter & Sport cars challenge [CLOSED]
Posted: Tue Apr 29, 2014 6:22 amHi everybody.
I've think to make a sportscar championship in the Paul Ricard Test Track.
The categories and rules are:
Lighter cars
RULES:
Sport cars
RULES:
To submit the car (only via forum), you need to publish in the post this structure (between brackets [], an example):
To submit your model, you need to PUT and submit the files in a message in a ZIP or RAR file. In the message you need to put the category who you submit the car, and the photo with the attached RAR/ZIP.
The required files are the body, plattform and engine. IS FORBIDDEN THAT TWO USERS OR MORE USES THE SAME ENGINE/BODY &/OR PLATTFORM: the both users there are disqualified.
You need to submit (NO in the rar/zip) a image of your car.
The submitted cars:
LIGHTER CARS
SPORT CARS:
The leaderboard:
Lighter cars:
Sport cars:
Congratulations to the Winners!
I've think to make a sportscar championship in the Paul Ricard Test Track.
The categories and rules are:
Lighter cars
RULES:
-Min/max mass: 780 kg/900 kg
-Engine: max capacity: 1700 cm^3 (normal aspirated; turbo forbidden).
-Forbidden materials: carbon fiber.
-Engine máx. cost: $800.
-All sliders there are YES OR YES set to 0 (engine, body, model...)
-Technology year: 1990
-Three-way no high flow catalytic converter, and a straight through flow muffler.
-The aero set can be set OBLIGATORY to NONE (fully clad, downlorce... is forbidden).
-Can use ONLY a rear wing and a ONLY lip.
-Can use only a single clutch and a maximum of 5 gears, and RWD/FWD (AWD is forbidden).
-The tires can be only a sport tyres.
-Race parts are FORBIDDEN.
Sport cars
RULES:
-Min/max mass: 980 kg/1500 kg
-Engine: max capacity: 3700 cm^3 (normal aspirated).
-Engine: max capacity: 2200 cm^3 (TURBO).
-Forbidden materials: carbon fiber.
-Engine máx. cost: $1800.
-All sliders there are YES OR YES set to 0 (engine, body, model...)
-Technology year: 1996.
-Three-way no high flow catalytic converter, and a straight through flow muffler.
-The aero set can be set ONLY to NONE or fully clad.
-Can use ONLY a rear wing and a ONLY lip.
-Max. gears: 6.
-Single Clutch.
-RWD or AWD (FWD forbidden).
-Only can be use a monocoque plattform.
-RACE PARTS ARE FORBIDDEN.
-NO LIMITED BODIES.
To submit the car (only via forum), you need to publish in the post this structure (between brackets [], an example):
BRAND: [Ford].
MODEL: [Capri RS3500].
USER: [vmo]
CHAMPIONSHIP: [Sport Cars, for example]
MODEL FILES (read the down paragraph) : XXXXX.zip
To submit your model, you need to PUT and submit the files in a message in a ZIP or RAR file. In the message you need to put the category who you submit the car, and the photo with the attached RAR/ZIP.
The required files are the body, plattform and engine. IS FORBIDDEN THAT TWO USERS OR MORE USES THE SAME ENGINE/BODY &/OR PLATTFORM: the both users there are disqualified.
You need to submit (NO in the rar/zip) a image of your car.
The submitted cars:
LIGHTER CARS
1. Montes Elipse (vmo)
2. ME Eridania (mer_at)
3. Hermington SC 1700 (hermmie)
4. Mierloi Aygo (xAleks)
5. Ambrosi Corsa (demenor)
SPORT CARS:
1. Crank Engineering Trolley (Spool)
2. Montes V8 TURBO (vmo)
3. Hermington SC-R 3700 (hermmie)
4. Dacia Duster Coupe (xAleks)
The leaderboard:
Lighter cars:
- Lighter_Cars_Results.png (15.11 KiB) Viewed 8995 times
Sport cars:
- Sport_Cars_Results.png (12.98 KiB) Viewed 8995 times
YOU NEED THE LATEST AUTOMATION VERSION.When you are making the model, you need to put first the engine, set cooling (almost with the same required cooling) or more, go to the engine section, go to the engine designer (when you are making the model, in the drivetrain-> engine-> choose engine->Revise Engine, and in the engine designer, go to testing, start, this and look if you are satified.
ATTENTION: Publish, please, the models in this post (if you don't like to upload the car files in this place, you can send me the car via PM).
Congratulations to the Winners!
Keep making challenges!