Initial D AE86 4A-GE Race engine
Posted: Mon Nov 04, 2013 2:15 amAE101 race engine, 11k redline, almost 240HP as mentioned in the series 
automationgame.com
A tycoon game made for people who live and breathe cars.
http://phpbb3.automationgame.com/
Initial D AE86 4A-GE Race engine
Page 1 of 1
Posted: Mon Nov 04, 2013 2:15 amRe: Initial D AE86 4A-GE Race engine
Posted: Tue Nov 05, 2013 12:04 amGreat work I have noticed a few atempts at this engine since the engine designer came out. A few pointers and feel free to correct any errors. I think all the 4A engines were iron block aluminium head also they used MPFI so change over from the carbs and finally since its a race motor you can ditch the cat and the restrictive exhaust types for simple straight through type by doing this and reducing some of the quality sliders I got the hours down by a thousand and droped the material cost to a bit over 1/3 of Rev0. Also its now at the 250 hp from the series.
Re: Initial D AE86 4A-GE Race engine
Posted: Fri Nov 08, 2013 8:44 amI don't really know the materials of 4A's, so I guessed it could be aluminium as long as it is a race engine In the series was mentioned 240HP and carbs (even visible). The quality sliders could be a little less as long as the engine could even be year 2000+ (not specified). Thanks for info
EDIT: And if it was 2000+ it will also have 11:1 compression ratio
In the series was mentioned 240HP and carbs (even visible). The quality sliders could be a little less as long as the engine could even be year 2000+ (not specified). Thanks for info EDIT: And if it was 2000+ it will also have 11:1 compression ratio