Page 1 of 9
Maximum power (3600hp+)
Posted:
Fri Mar 22, 2013 6:37 amby JamesMiller
Right, MAXIMUM POWAH!
Design an engine designed for maximum power. Only one rule: It MUST be able to make at least one run up the drag strip, so no 0 MTBFs please.
So what have you got? I'll start with mine; 3056hp / 2611nm torque / 12km MTBF.
Remember, 0 MTBF doesn't count. It's no good if it doesn't get past the pit entrance!
Re: Maximum power
Posted:
Fri Mar 22, 2013 6:42 amby Juno8
I am 800bhp down
WTF how can everyone get more than me LOL xD
Re: Maximum power
Posted:
Fri Mar 22, 2013 6:55 amby Juno8
I managed to get well...3084bhp here are the stats
Power: 3084bhp @ 8400rpm
Torque: 1999 ft-Lbs @ 7400rpm
Red line: 8400rpm
Life Span: 0.0mm (failed on Stand)
Responsiveness: 71.0
Loudness: 50.0
Smoothness: 59.8
Weight: 528.3kg
Size (mm): 659x534x905
Service Costs: $9256.61
Emissions: 38 (I find that extremely surprising!!)
Economy: 6.61% - 1.913lb/(hph)
Fuel Octane (RON): 99.0
all I did was change the fuel system...and that was it haha
Re: Maximum power
Posted:
Fri Mar 22, 2013 6:58 amby JamesMiller
a fail on stand doesnt count. I've managed just under 3200hp with a fail on stand but that's pointless :p
Re: Maximum power
Posted:
Fri Mar 22, 2013 6:59 amby Juno8
I know man...I just wish the guys would program in Tungsten/Titanium alloy could you imagine the abuse that would take before it would fail...
Re: Maximum power (3000hp+)
Posted:
Sat Mar 23, 2013 5:44 amby JamesMiller
yep stronger internals would be lovely lol
I've tuned the monster some more....
Re: Maximum power (3000hp+)
Posted:
Sat Mar 23, 2013 5:58 amby Juno8
I know I would love to Quad turbo that beast of an engine...and then really crank the boost up to 6 Bar and let it ROAR! could you imagine how much power that would be if I had 6 Bar boost, 4 Turbo Chargers and DevMeth....I guess somewhere approaching 6000bhp to 9000bhp+
Re: Maximum power (3000hp+)
Posted:
Sat Mar 23, 2013 6:09 amby oldgreg
Juno8 wrote:6 Bar boost, 4 Turbo Chargers and DevMeth
And "Ultra Heavy Duty" bits for the bottom end.
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 6:38 amby Juno8
DAFFY add this please to the game ultra heavy duty conrods and pistons!
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 7:00 amby Killrob
that one wouldn't rev very high
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 8:29 amby Juno8
stuff high revving imagine how much torque you would have in the low end it would rev to like 3000rpm but have INSAAAAAANE Torque figures muhahahahaha
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 9:59 amby JamesMiller
mmm torque.
I just did some sums and this engine is right on that 250kw/L limit well, im at 249.7kw/lL so maybe there's a few more horses to gain yet
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 10:22 amby Juno8
I would love to make a 15,000bhp engine you know a 20 cylinder 10 litre monster so 1500bhp per litre!
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 10:29 amby Messorix
I managed a 2999 bhp engine which ran, but when I changed something, it died.
I couldn't for the life of me figure out how to get back to 2999
Re: Maximum power (3100hp+)
Posted:
Sat Mar 23, 2013 10:35 amby Juno8
I know someone has an engine with 3060bhp and a run life of 12km....