Brets Company - Engine C16SE MPFI BR Version

[Breno]

I tried to replicate the following engine in automation:

Specs



PS:The European version contains variations in compression and range torque / power.

L4 - 1.6L (1.598 cm3)
Overhead Cam - 2 valves per cylinder
Bore x Stroke: 79.0 x 81.5 mm
Compression: 9,4
Fuel System: Injection Multi Point
Power: 92 cv / 5.600 rpm
Torque: 13,0 kgfm / 2.600 rpm
Block: Cast Iron
Head: Aluminum

My Automation Engine



Hey, 90.7hp = 91.95cv or 92cv
Sorry for torque in excess, but it comes at the correct rpm!

Specifications:

Block Material: Cast Iron
Bore x Stroke: 79.0 x 81.5 mm
Crank: Cast Iron
Conrods: Cast
Pistons: Cast
Head and Valves: Overhead Cam / 2
Head Material: Aluminium
Compression: 9.4:1
Cam Profile: 24
VTT: ON
VLL: 29
Injection: Multi Point EFI / Single /
Intake: Standard
Fuel: Regular Unleaded - 91.0
Fuel Mixture: 12.5:1
Ignition Timing: 85
RPM Limit: 6600
Headers: Short Cast
Diameter: 1.25''
Catalytic Converter: High Flow Three-way
First Muffler: NO
Second Muffler: NO

You know how I can improve this engine? Send us feedback.