my multi-purpose engine

[headacheengineering]

I made a multi purpose engine. it has decent power, reliable, light, efficient, cheap to make.

any ideas to improve the above attributes?

P.S: the how much power I can possibly get out of it has been answered already, 480 HP and 504 ft/lbs (check 2.2 Boom boost thread.)

2.2 L EFI, Twin Cam VVT+L, Turbo, 280 HP and 260 ft/lbs; 20 % fuel efficiency, 70K+ MTBF.

[url][URL=http://s1329.photobucket.com/user/dwelasri/media/Screenshot26_zps8636aa54.png.html][/url][/url]

[09webbad]

Nice engine! I quite like it actually... it'll be great for a little sports car and a hot hatch due to its weight and power. But the economy is too low for the average saloon or hatchback and if I was to improve something, I would reduce some of the parts quality, because the man-hours is getting a little high

[Juno8]

I cant put any fault to this engine its ideal its cheap and very cost effective I give you that

[headacheengineering]

thanks!!

@09webbad what kind of fuel economy should I aim for? I want to make this engine for most of my cars (for campaign mode, gotta prepare!)

@Juno8 Thank you very much!

[09webbad]

Sorry for the late post but I recon something around 25%... VVL and low friction cast pistons will help lift that figure figure nicely