Real World Engines You've Made

[Coastlein]

Has anyone else made engines from real life? I started by building the 2.3L from my 1993 Ford Ranger and then built a Mazda F2.

[Punkal]

I had written up a long answer but accidental hit post replay instead of submit and lost my answer... So this is a short version.

Yes I have but more importantly the beta testers and developers recreated hundreds of engines before the demo was released to see if the engine designer was reproducing correct and accurate data.

[valrond]

Just a couple. The 1.6i 16v from my 1994 Ford Escort. Just by putting the known data, it came very close to the real numbers. I love it.

[ratonbox]

I made the Dacia Logan 1.4 MPI engine earlier today, with just the small amount of data that I had, but it came pretty close to the real thing. (3 hp and about 4Nm off)

[Marian87]

I've just made the Dacia 1310 engine, matching what info I could find on bore and stroke measurements, compression and how much HPs it should make, I managed to get pretty close.

[MarcusDrall]

Has anyone else made engines from real life? I started by building the 2.3L from my 1993 Ford Ranger and then built a Mazda F2.

I tried to build the 2.3's older brother with a 2 barrel carburetor and could not get it to run on Regular Fuel, without it detonating. Couldn't get it to make 88 horsepower at 4800rpm either.Always made around 100.

[Sonic_AFB]

i made the K20Z4 from my brother's type r and i get the same hp with the same cc = 2.0 liter 86 bore x 86 stroke 204hp redline 8300 rpm

[Dario]

I've done my 206cc 1.6l engine is excatly the same

(http://www.carfolio.com/specifications/ ... 00760&l=it)

[Chadeux]

I'm working on an Atlas LK5 right now. The real engine has a 4 inch stroke and it seems it will only let me go up to 3.937, close enough I guess. Still some more tweaking to do to get the power output numbers right.

[jwrebholz]

I started to build the GM LNF four cylinder (2.0L turbo direct-injection Ecotec) but the turbos aren't ready yet.

Naturally aspirated it still makes 155HP and 149lb-ft torque, which isn't too bad for a 2.0L four cylinder with a 6,000 RPM redline.

[ArTea88]

Hi Guys,

after i have finished all szenarios, i only try to build real engines.
I think in the most example it works fine in focus of torque and horsepower at the real upm's.

For Example a few engines from 1.0 to 1.4l engine displacement.

Questions are welcome

[iamthecheese]

I've accurate modeled the 2.4L honda K series engine from my accord withing +-1 hp and +-100rpm

[MAC_HATER]

made a bunch of toyota engines - 3S, 4A, 2T, and the like

also spent a bunch of time making a GM Iron Duke Tech IV cause im sick like that - it was bang on the same as the RL engine

[padda94]

The first engine i made was the Mazda F2 engine or more exact The F2H2 engine. Exactly as it is in my 929. Sadly i lost it when my computer crashed.