automationgame.com

Posted: **Tue Dec 31, 2013 11:58 am**

I was wondering what dimensions the cam profile is using in the game.

Posted: **Tue Dec 31, 2013 2:06 pm**

The cam profile is a rating scale that takes into account lift, duration, valve spring stiffness, and overlap. It is not tied to any specific dimensions. Higher numbers have more lift/duration/overlap, and stiffer springs.

That said, I find it much easier to have a 0-100 scale than to specify:
184* duration @ .050", 0.370" lift, 114* lobe separation angle, and a 300 lbs/in spring rate...

Posted: **Tue Dec 31, 2013 3:01 pm**

Slim Jim wrote:The cam profile is a rating scale that takes into account lift, duration, valve spring stiffness, and overlap. It is not tied to any specific dimensions. Higher numbers have more lift/duration/overlap, and stiffer springs.

That said, I find it much easier to have a 0-100 scale than to specify:
184* duration @ .050", 0.370" lift, 114* lobe separation angle, and a 300 lbs/in spring rate...

thank god! that would be overkill.

Posted: **Wed Jan 01, 2014 2:47 pm**

ok, thanks

automationgame.com

cam profile

cam profile

Re: cam profile

Re: cam profile

Re: cam profile