Cant install mods.
12 posts
• Page 1 of 1
High new here to the forum. I'm not the most tech savvy so bare with me. I downloaded a couple engines and I cant seem to figure out how to get them in game. I put them in engine folder and nothing happened. So I tried putting them in the import folder and same thing. I also tried putting Bonneville track in imports and nothing. If some one could point me in the right direction it would be greatly appreciated. I've tried searching the forums with no good answers.
Re: Cant install mods.
You need to drop the zip file into the import folder, don't extract them. Tracks need to be put into the tracks folder but need to be extracted.
Re: Cant install mods.
The engine files I downloaded was just a lua file. Nothing else.
Re: Cant install mods.
Hmm, then put that into \Documents\My Games\Automation\Engines\Variants
and see if you find it in the Engine Manager
and see if you find it in the Engine Manager
Re: Cant install mods.
That doesn't seem to do the trick either, I've deleted all cars and engines just in case I was over looking over it and nothing is showing up.
Re: Cant install mods.
Well, thing is that an engine should really be two files: one for the model and one for the variant. Does it work for cars for you?
Re: Cant install mods.
I haven't tried any cars yet, but here's an example of one engine I downloaded. It's just one file that the person put up.
http://automationgame.com/phpBB3/viewto ... =34&t=5917
http://automationgame.com/phpBB3/viewto ... =34&t=5917
Queen of Track Building
Posts: 1613
Joined: Sun Dec 08, 2013 11:47 am
Location: Atlanta, GA, USA
Cars: Chevy Cobalt
Re: Cant install mods.
Is that engine a pre-steam build? It's dated 15 March, 2015. This is probably the problem. If it isn't pre-steam standalone build, then it is an incomplete engine and won't work without the other file. I don't track build numbers close enough to know which was which, since this is right about the time of the initial steam release. and probably before the stand alone version was updated.
Swanson Motorsports Engineering Atlanta, GA, USA
American performance has no compromise!
Company ID: 1969666
SME on Automation Hub!
List of 2014 F1 tracks available **19/19 complete** Not all credit goes to me
Request your favorite track here
Posts: 228
Joined: Mon Mar 09, 2015 12:53 pm
Location: USA
Cars: None as of now and at least 3 years from now.
Re: Cant install mods.
07CobaltGirl wrote:Is that engine a pre-steam build? It's dated 15 March, 2015. This is probably the problem. If it isn't pre-steam standalone build, then it is an incomplete engine and won't work without the other file. I don't track build numbers close enough to know which was which, since this is right about the time of the initial steam release. and probably before the stand alone version was updated.
150315 was a very early steam build IIRC.
But even so it had the modern file structure.
Rado Automotive Incrorporated (my automation car company): 1946998
Rado Automotive Incorporated car showroom
Rado Automotive Incorporated car showroom
Re: Cant install mods.
So pretty much the steam build dont support it?
Queen of Track Building
Posts: 1613
Joined: Sun Dec 08, 2013 11:47 am
Location: Atlanta, GA, USA
Cars: Chevy Cobalt
Re: Cant install mods.
Short answer: No, the engine in your example will not run on steam version.
Longer answer: Since the release on steam, there are four files for a car. Two for the car (Model and Trim) and two more for the engine (Family and Variant). The engine you posted as an example of not loading is either pre-steam, or incomplete. The devs can tell you exactly what version of Automation that engine was created in, but I cannot. The steam realease was on or about 12 March, 2015 (I also don't remember the exact date) and a stand-alone version was updated to the same file system about 2 weeks later (first week of April?). B150315 would have been released on 15 March, 2015, so it could be one of the early steam builds, or a stand-alone update prior to steam. It really isn't important today, as any version you have should require the two engine files to work, and you have only one.
Longer answer: Since the release on steam, there are four files for a car. Two for the car (Model and Trim) and two more for the engine (Family and Variant). The engine you posted as an example of not loading is either pre-steam, or incomplete. The devs can tell you exactly what version of Automation that engine was created in, but I cannot. The steam realease was on or about 12 March, 2015 (I also don't remember the exact date) and a stand-alone version was updated to the same file system about 2 weeks later (first week of April?). B150315 would have been released on 15 March, 2015, so it could be one of the early steam builds, or a stand-alone update prior to steam. It really isn't important today, as any version you have should require the two engine files to work, and you have only one.
Swanson Motorsports Engineering Atlanta, GA, USA
American performance has no compromise!
Company ID: 1969666
SME on Automation Hub!
List of 2014 F1 tracks available **19/19 complete** Not all credit goes to me
Request your favorite track here
Supercharged
Posts: 61
Joined: Sun Sep 28, 2014 9:00 am
Location: Sherbrooke Québec
Cars: 2014 Hyundai Elantra Coupe 2.0
2011 Hyundai Tucson 2.4
Previously own:
2012 Hyundai Veloster
2000 Honda Civic coupe Si
Re: Cant install mods.
I will try redo my engine on steam version. But if I can save some works answer me:
If I create a template Family engine and add a same renamed Variants .lua from pre steam version will it work?
If I try coping text editing Variant .lua files from old version?
Older pre steam track still working?
Can I download somewhere older offline pre steam version and note variable to redo on steam version.
If I create a template Family engine and add a same renamed Variants .lua from pre steam version will it work?
If I try coping text editing Variant .lua files from old version?
Older pre steam track still working?
Can I download somewhere older offline pre steam version and note variable to redo on steam version.
Name of Car Company: Frechette Automobile R et D. FARD.
Owner of company: frechett79
Established: January 1979
Company ID: #1979001
Engine reserch and developpement forum.
http://automationgame.com/phpBB3/viewtopic.php?f=34&t=4872
Owner of company: frechett79
Established: January 1979
Company ID: #1979001
Engine reserch and developpement forum.
http://automationgame.com/phpBB3/viewtopic.php?f=34&t=4872
12 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests