FAQ  •  Login

Corvette6317's Mods (Updated on 28/3/16)

<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Sat May 23, 2015 2:44 am

Corvette6317's Mods (Updated on 28/3/16)

For descriptions/images check the Steam link

60sSedanCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... =468033840
Standalone; https://www.dropbox.com/s/dxps5r50z3xk7 ... e.zip?dl=0

00sCoupeCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... earchtext=
Standalone; https://www.dropbox.com/s/44uhnt237m43j ... e.zip?dl=0

60sMRCoupeCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... earchtext=
Standalone; https://www.dropbox.com/s/5n9zw71muzirb ... e.zip?dl=0

70sSedanCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... =578780971
Standalone; https://www.dropbox.com/s/p071mh1f7bccv ... e.zip?dl=0

90sMRSmallCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... =583161520
Standalone; https://www.dropbox.com/s/he4hgxftdyzyx ... e.zip?dl=0

10sSedan01Corvette:
Steam; http://steamcommunity.com/sharedfiles/f ... =600064191
Standalone; https://www.dropbox.com/s/svq928rxrk0qa ... e.zip?dl=0

40sSedanCorvette:
Steam; http://steamcommunity.com/sharedfiles/f ... =636250761
Standalone; https://www.dropbox.com/s/akxy2l58ip5ny ... e.zip?dl=0

CorvetteC7 Style Grille:
Steam; http://steamcommunity.com/sharedfiles/f ... =573081912
Standalone; https://www.dropbox.com/s/33q22kl1kcuzw ... 1.zip?dl=0

Countach Style Wing:
Steam; http://steamcommunity.com/sharedfiles/f ... =573124530
Standalone; https://www.dropbox.com/s/h2u4h3jtvw4nm ... 1.zip?dl=0

Porthole Side Windows:
Steam; http://steamcommunity.com/sharedfiles/f ... =580359427
Standalone; https://www.dropbox.com/s/1x0by70pdsykv ... e.zip?dl=0

Shaker-style Scoop:
Steam; http://steamcommunity.com/sharedfiles/f ... =593083608
Standalone; https://www.dropbox.com/s/7rka1khizhl7x ... r.zip?dl=0
Last edited by Corvette6317 on Mon Mar 28, 2016 8:16 pm, edited 28 times in total.
<<

Oskiinus

User avatar

Posts: 577

Joined: Sat Oct 04, 2014 3:49 am

Location: Tarnów, Poland

Cars: Not a car, but I own Arkus Classic Junior in black ;)

Post Sat May 23, 2015 2:46 am

Re: Corvette6317's Mods

Pretty nice.
CEO of Airborne Automotive, Airborne Motor Group and Co-CEO of it's sub-brands :D
viewtopic.php?f=35&t=5895 - Thread!
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Sat May 23, 2015 2:47 am

Re: Corvette6317's Mods

A new grille based on the Corvette C7, it doesn't have any variants apart from the one shown in the picture but I plan to make more later. If anyone else wants to make and upload variants of it they are welcome to.
Attachments
Untitled-2.jpg
Untitled-2.jpg (194.84 KiB) Viewed 24327 times
corvettec7_grille.zip
(17.88 KiB) Downloaded 486 times
<<

TrackpadUser

User avatar

2-Star Beta Tester
2-Star Beta Tester

Posts: 877

Joined: Tue Dec 09, 2014 3:20 pm

Location: Montreal, Canadia

Cars: 2006 Suzuki Swift+

Post Sat May 23, 2015 2:54 am

Re: Corvette6317's Mods

Seems quite nice. I'll check it later when I get home. If you need help with the morphing, and have questions that haven't been answered by Andy's vid, me, Pyrlix and Kubboz are regularly on the game's IRC.

Also, don't worry about the file name.
<<

RevPJ

Turbocharged
Turbocharged

Posts: 26

Joined: Sun Mar 03, 2013 9:03 am

Location: New Jersey, USA

Cars: '74 Triumph Spitfire, '69 Cadillac Funeral Coach, '97 Mitsubishi Eclipse GS-T Spyder

Post Sat May 23, 2015 4:18 am

Re: Corvette6317's Mods

Nice work! It's actually kind of reminiscent of a '68 Plymouth Barracuda.
<<

Drake

User avatar

Turbocharged
Turbocharged

Posts: 347

Joined: Wed Jan 26, 2011 10:41 am

Location: Birdland

Cars: 1986 Ford F-250 Diesel, 1971 Datsun 240Z, 2002 Saab 9-3 SE

Post Sun May 24, 2015 1:59 pm

Re: Corvette6317's Mods (Updated Body)

Nice work. :)

It has some pretty interesting morphs, and while sometimes you can make some pretty messy stuff, I'd rather have too much morphing and just have to tweak it around a bit to get the body lines straight than not having enough options to morph.

My only complaint is the lack of downward morphing of the front end. It would be nice to be able to point the nose down a bit more for that pointy aggressive look.
<<

TrackpadUser

User avatar

2-Star Beta Tester
2-Star Beta Tester

Posts: 877

Joined: Tue Dec 09, 2014 3:20 pm

Location: Montreal, Canadia

Cars: 2006 Suzuki Swift+

Post Tue May 26, 2015 3:11 am

Re: Corvette6317's Mods (Updated Body)

Decided to look at it a bit more in detail and I have to say that it is quite nice, but there are still a few small things that can be made better.

1- Mesh

The mesh itself is very good, and you don't really need to change it. The thing I will mention is that most 3d artists make their windows slightly recessed into the body to give slightly more depth.

2- UVW Mapping

Works fairly well for the most part, which is very good considering this part can be hard to get right, especially in the beginning.

On the front part though, stamping anywhere further back on that zone results in very bad jaggies. I would reccomend trying to redo the UVW Mapping to try to fix that problem. What I usually do is drag a vent around to see if everything works well.

The seams on the front part do not stamp. This is probably caused by incorrect material assignation in the .lua file.

You also have some stamping problems on the upper back corners of the car, where it makes the hole larger than it should.

3- Morphing

Front-

I would recommend making the morph that slopes the hood a bit longer. Right now it just slopes the very tip of it.
Also, 3DS Max, being the #$@!$ program that it is, will modify your old weights when assigning new ones on certain vertices, creating things like what happens with your current "front lengthening" morph.

Windshield-

I am personally not a big fan of the technique used as it tends to be a PITA to make properly.

Yours works well, although the top morph tend to create a lot of weird creases in the side windows.

Door seam-

I understand what you were trying to do, but IMHO the results are not really visually appealing. I would suggest maybe making one bone that moves what the current two move, and one bone that would extend the door in a more smoother fashion like this.

Image

Back window-

The morphs work quite well for the most part, but there are a few things I would recommend that you try to rework a little.

The upper one creates a few bumps on the back pillar when morphing up.

The lower one creates two weird spikes that show up when morphing back and up.

I would also recommend that you make the lower back morph affect a little bit more of the trunk, so it has less of a tendency to create creases.

Trunk-

Works very well although some of the possible results are quite interesting :D



Hoping you will continue making more awesome models like this one because you show a lot of potential.
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Tue May 26, 2015 6:18 pm

Re: Corvette6317's Mods (Updated Body)

Thanks for the feedback, I'll look into the issued trackpaduser mentioned and see what I can do to improve it. I've also been working on a sedan version and have tidied up the mesh a bit, that will probably make the morphing go much smoother and I'll probably redo the coupe when I've gotten some more practice.
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Tue Jun 02, 2015 9:18 pm

Re: Corvette6317's Mods (Updated Body with New Sedan)

My 60s coupe has been updated, check OP for pics and download.
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Mon Jun 22, 2015 8:19 pm

Re: Corvette6317's Mods (Updated on 22/06/15)

60sSedan/Coupe had been updated again, link and pictures in OP.
<<

TrackpadUser

User avatar

2-Star Beta Tester
2-Star Beta Tester

Posts: 877

Joined: Tue Dec 09, 2014 3:20 pm

Location: Montreal, Canadia

Cars: 2006 Suzuki Swift+

Post Mon Jun 29, 2015 6:36 am

Re: Corvette6317's Mods (Updated on 22/06/15)

Is this you http://steamcommunity.com/sharedfiles/f ... =469714186 ?

I know you updated the complete pack on steam, so I found it very weird when I saw that.
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Mon Jun 29, 2015 12:00 pm

Re: Corvette6317's Mods (Updated on 22/06/15)

trackpaduser wrote:Is this you http://steamcommunity.com/sharedfiles/f ... =469714186 ?

I know you updated the complete pack on steam, so I found it very weird when I saw that.

Thank you for telling me, it's not an account of mine and I've asked them to remove it.
<<

Corvette6317

User avatar

Turbocharged
Turbocharged

Posts: 145

Joined: Fri Dec 27, 2013 2:03 pm

Cars: None

Post Mon Jul 06, 2015 2:34 am

Re: Corvette6317's Mods (Updated on 05/07/15)

New coupe body that can be morphed between a Camaro or a Mustang.

Steam Workshop Link: http://steamcommunity.com/sharedfiles/f ... earchtext=
Attachments
00CoupeCorvette.zip
(187.81 KiB) Downloaded 425 times
Untitled-1.jpg
Untitled-1.jpg (588.95 KiB) Viewed 21852 times
<<

willempjuh2000

User avatar

Turbocharged
Turbocharged

Posts: 132

Joined: Sun Dec 08, 2013 6:56 am

Location: The Netherlands

Cars: Talbot Samba Cabriolet 1.3,
Citroën CX 25 GTi Turbo

Post Mon Jul 06, 2015 3:34 am

Re: Corvette6317's Mods (Updated on 22/06/15)

Ohhh Yes :D
That looks very good!
Name of Car Company: Halfix Cars
Owner of Company: willempjuh2000
http://www.automationhub.net/company-catalog/company/34
Established: 1946
Company ID: 1946526
<<

TrackpadUser

User avatar

2-Star Beta Tester
2-Star Beta Tester

Posts: 877

Joined: Tue Dec 09, 2014 3:20 pm

Location: Montreal, Canadia

Cars: 2006 Suzuki Swift+

Post Mon Jul 06, 2015 9:05 am

Re: Corvette6317's Mods (Updated on 22/06/15)

Very nice.

I have to say that it looks quite good for the most part, although the sides of the car have somewhat of a weird look to them.

Could you post pictures of your mesh, especially the sides?

I would also suggest to add a few polygons on the length of the car, mainly to smoothen the seams of the hood a little bit as they look very angular right now. It will add polygons but it should not cause any problems since your model doesn't really seem to be polygon heavy.

Appart from this you did a very nice job, stamping seems to work well, and the morphs are also very nice.
Next

Return to 3d Artists Modding Forum

Who is online

Users browsing this forum: No registered users and 0 guests