FAQ  •  Login

AutomationHub - Show your designs!

<<

Rossriders

Supercharged
Supercharged

Posts: 68

Joined: Sat Mar 08, 2014 4:31 am

Location: Somewhere in 'murica

Cars: Nothing yet, hopefully something reliable, and decent in the future.

Post Sun Apr 26, 2015 6:54 am

Re: AutomationHub - Show your designs!

Reason I'm posting this car here rather than start a thread on my company, is that it...among others I'm still ...trying to learn, even with all the time I've spent on this game.

Encouraged (sorta) by two community challenges I missed due in no small part because of health and work issues (which also explains why I've been more a ghost than I usually am around here)...one is a car that while more expensive than the challenge, was my attempt to get a car with a V8 able to make 30mpg (US) at a minimum.

After re-reading fuel requirements onwards IRL, I decided to push it a step forward by going for 35mpg with this mid size sedan (if it can be called that).

The Weiler Kato is still in development, but I suppose I'm curious to what others think, be it's aesthetics, the engine/drive train choices...or really the car in general.

I am a bit ...concerned about it's looks.

While it wasn't as if I've had my eyes closed when viewing cars, this game has made me take a look at them again in a different light, in my attempt to make my car...look like a damn car. Granted it could be me not having the right tools yet when I see other people with their cars, I figure I must be 'doing it wrong no matter how I'm going about it (particularly with tail-lights). I don't know...maybe I'm not so bad...maybe I'm nuts. Tried to aim for a functional but minimalist approach given I still kinda suck at this...

Ranting aside...what do you all think?

Sorry for not speaking on the earlier cars...tried several times and the one time I did...I lost the data and I'm a little too angry at myself (for doing so and only realizing afterwards) to try and write it down again.

Maybe later...

weilerkato.png
weilerkato.png (794.76 KiB) Viewed 17064 times


weilerkatosurfacestats.png
weilerkatosurfacestats.png (78.2 KiB) Viewed 17064 times
<<

UlyG

Posts: 36

Joined: Sun Apr 19, 2015 5:49 am

Cars: 97 Megane Coupe

Post Tue May 05, 2015 11:24 am

Re: AutomationHub - Show your designs!

Here's one of my first ever designs, intended as a premium hatchback for the European market in the late 2000s/early 2010s

hatchfrontquart.png

hatchfront.png

hatchrearquart.png


Feedback welcome :)
<<

UlyG

Posts: 36

Joined: Sun Apr 19, 2015 5:49 am

Cars: 97 Megane Coupe

Post Thu May 07, 2015 9:23 am

Re: AutomationHub - Show your designs!

Trying a different style on the design this time, again aimed at the mid-upper range European hatchback market.

largehatchfront.png
largehatchfront.png (516.24 KiB) Viewed 16982 times


I feel like the rear on this one is missing a little something, but playing around with other additions didn't seem to quite fit. It's quite likely that one of these two cars, or a combination of design elements from each, will influence my upcoming Useese Automobili brand range that I'm working on.

As with the above post, feedback welcome and encouraged.
Attachments
largehatchrear.png
largehatchrear.png (448.97 KiB) Viewed 16982 times
<<

LinkLuke

Supercharged
Supercharged

Posts: 7

Joined: Wed Oct 29, 2014 8:51 am

Post Sun May 10, 2015 7:44 am

Re: AutomationHub - Show your designs!

I cant validate my Automation Hub account. I converted my original automation to a steam key and today i have tried to create an account. I have tried to validate using steam ID and display name but neither work, and sometimes it goes to this screen: http://s7.postimg.org/mfn2219qz/automation.png, wizzy can you help please.
<<

WizzyThaMan

User avatar

Turbocharged
Turbocharged

Posts: 2221

Joined: Sat Mar 23, 2013 8:39 am

Location: The Netherlands

Cars: Citroën Saxo, Mazda 2

Post Sun May 10, 2015 12:53 pm

Re: AutomationHub - Show your designs!

Should be solved already through PM now :)
Image
Founder of AutomationHub, for all your Automation needs!
Please visit us at: http://www.automationhub.net
Like our facebook page: http://www.facebook.com/automationhub
Our livestream channel: http://www.twitch.tv/automationhub
<<

UlyG

Posts: 36

Joined: Sun Apr 19, 2015 5:49 am

Cars: 97 Megane Coupe

Post Mon May 11, 2015 3:02 am

Re: AutomationHub - Show your designs!

2015-05-10_00001.jpg
2015-05-10_00001.jpg (314.07 KiB) Viewed 16326 times
2015-05-10_00002.jpg
2015-05-10_00002.jpg (323.13 KiB) Viewed 16326 times
2015-05-10_00005.jpg
2015-05-10_00005.jpg (426.71 KiB) Viewed 16326 times


Spent half an hour or so on a Grand Tourer and came up with this. Intended for the Maserati/Merc SL/DB9 sub-class, with a N/A 4.0 V8 and a 7-spd double-clutch transmission. Cost came to $40,200 and 300 production units...

Feedback welcome, as with the two designs above.. :oops:
<<

captaind00m

Posts: 40

Joined: Thu Feb 05, 2015 4:24 am

Cars: e38 750il

Post Tue Jun 23, 2015 7:21 am

Re: AutomationHub - Show your designs!

using a v8 6.3 liters delivering 570 hp and using 9.38l/100km. with a max speed of 335km/h

its called ALPHA
Image
Image
Image
Image
Image who doesnt love fresh torn out guts in the morning
<<

DoctorNarfy

User avatar

Naturally Aspirated

Posts: 312

Joined: Sun May 24, 2015 5:47 am

Location: 'Murica

Cars: My Chevy Cavalier is gone. I am Carless.

Post Wed Jul 15, 2015 1:47 pm

Re: AutomationHub - Show your designs!

captaind00m wrote:using a v8 6.3 liters delivering 570 hp and using 9.38l/100km. with a max speed of 335km/h

its called ALPHA
Image
Image
Image
Image


If you're going for top speed, you might wanna cut the wing. It helps sometimes :3
"Wisdom is a circle, what you receive, you must give back." -Vert Wheeler
<<

DoctorNarfy

User avatar

Naturally Aspirated

Posts: 312

Joined: Sun May 24, 2015 5:47 am

Location: 'Murica

Cars: My Chevy Cavalier is gone. I am Carless.

Post Sun Jul 19, 2015 9:45 am

Re: AutomationHub - Show your designs!

I've Re-Created the 1985 Dodge Omni. It Is By No Means an Exact Replica, But I'm Pretty Pleased with it. :D

Doctornarfy - Dodge Omni.zip
(84.5 KiB) Downloaded 464 times


It Comes with the 5 Speed Chrylser Manual Transmission. The Car uses the Chrysler 2.2 Liter I4 Naturally Aspirated Engine. I Had to cheat in order to make the engine fit, so i Mounted it Longitudinally. I made the Car All wheel drive, then sent 100% Of the power to the front wheels, to make the engine fit in the car. I could find No documentation about the Springs used in the 85 Omni, so i just took a guess. The Weight of the Car is pretty much spot on, so i'm pretty pleased with that. I Could Not however, match the gas mileage

Screenshot (22).png
Screenshot (22).png (1.06 MiB) Viewed 16151 times


Screenshot (21).png
Screenshot (21).png (1.11 MiB) Viewed 16151 times


All In all, i'm Pretty pleased with it. If Anybody can find any extra Documentation that i got wrong about this car, please let me know!
"Wisdom is a circle, what you receive, you must give back." -Vert Wheeler
<<

Nirat

User avatar

Posts: 48

Joined: Tue Jun 23, 2015 1:28 am

Location: BKK Thailand

Cars: Chevrolet trailblazer LTZ1
JZA70 MKIII

Post Tue Jul 21, 2015 12:34 am

Re: AutomationHub - Show your designs!

UlyG wrote:
2015-05-10_00001.jpg
2015-05-10_00002.jpg
2015-05-10_00005.jpg


Spent half an hour or so on a Grand Tourer and came up with this. Intended for the Maserati/Merc SL/DB9 sub-class, with a N/A 4.0 V8 and a 7-spd double-clutch transmission. Cost came to $40,200 and 300 production units...

Feedback welcome, as with the two designs above.. :oops:


I love your design simple yet refine
K's Works Design viewtopic.php?f=35&t=6962
<<

Diax1324

Naturally Aspirated

Posts: 73

Joined: Mon Aug 06, 2012 10:28 am

Cars: Volkswagen Baja Beetle, several Type 2 buses (including a dropgate truck) Ford Fusion

Post Thu Jul 23, 2015 12:32 pm

Re: AutomationHub - Show your designs!

TyashiExMachina wrote:Here is my beauty, the Salamanca.



The Salamanca models are as follows :

2.6E
Price: [$30,000 AUD]
Power: [260bhp]
Weight: [1150kg]
0-60: [4.8 sec.]
Top Speed: [155mph/250kmh (lim)]

2.6E Turbo
Price: [$32,250 AUD]
Power: [320bhp]
Weight: [1200kg]
0-60: [4.4 sec.]
Top Speed: [155mph/250kmh (lim)]

Superlight
Price: [$40,000 AUD]
Power: [320bhp]
Weight: [790kg]
0-60: [3.6 sec.]
Top Speed: [155mph/250kmh (lim)]


I need you to tell me what that car body is.
What mod is it? I really want it. Nobody who uses it ever says what it is, like it's common knowledge or something.
<<

BassixDnB

User avatar

Posts: 38

Joined: Mon Jul 27, 2015 6:09 am

Cars: None currently.

Post Wed Jul 29, 2015 1:34 pm

Re: AutomationHub - Show your designs!

most ridiculous car ever.JPG
most ridiculous car ever.JPG (186.87 KiB) Viewed 17098 times

most ridiculous engine ever.JPG
most ridiculous engine ever.JPG (205.78 KiB) Viewed 17098 times

most ridiculous stats ever.JPG
most ridiculous stats ever.JPG (48.6 KiB) Viewed 17098 times

Did I go too mad?
I think I did...
Maybe not...
I definitely did.

Edit: Sorry for your eyes...Since the car was already stupidly mad, I might as well make it pink too!
<<

BassixDnB

User avatar

Posts: 38

Joined: Mon Jul 27, 2015 6:09 am

Cars: None currently.

Post Thu Jul 30, 2015 4:30 am

Re: AutomationHub - Show your designs!

I know my last car was a sight for sore eyes, but here's a much more mature vehicle:
Efficient Hatchback.jpg
Efficient Hatchback.jpg (427.66 KiB) Viewed 17085 times

Efficient Hatchback Stats 1.JPG
Efficient Hatchback Stats 1.JPG (37.8 KiB) Viewed 17085 times

Efficient Hatchback Stats 2.JPG
Efficient Hatchback Stats 2.JPG (40.37 KiB) Viewed 17085 times

It's efficient, pretty drivable, pretty inexpensive, safe, reliable, and it still has a top speed of approximately 130 mph.
<<

TauSigmaNova

Posts: 40

Joined: Tue Jun 30, 2015 2:03 pm

Cars: I'm a teenager in NYC, you think I have a car?

Post Thu Aug 06, 2015 5:17 pm

Re: AutomationHub - Show your designs!

Might as well post this... Was the first car I ever did in automation, based on a real life design I've been working for a while (It's based off it, but at the time of it's creation, I couldn't get it to be even close to what the real design looks like.) It's since been tuned and I believe I got around 7:27 or 7:28 on Green Hell at most. I'm planning on redo-ing it soon. This car was built in automation a bit after I started playing, about a month ago.

IDX Automotive IDX Sports Coupe
Image
Image
Image
Image
<<

Nirat

User avatar

Posts: 48

Joined: Tue Jun 23, 2015 1:28 am

Location: BKK Thailand

Cars: Chevrolet trailblazer LTZ1
JZA70 MKIII

Post Tue Sep 15, 2015 2:55 am

Re: AutomationHub - Show your designs!

I didn't got much time to play lately last time I check there are only a few mod at steam works shop but now I it got a lot of mod I'm very happy because I can design my car more different than before so hee my new car "Vihok"(thai word for bird in majestik way) I'm too lazy too do a final adjustment atm so please ignore bad stat
Attachments
all.jpg
all.jpg (662.91 KiB) Viewed 16942 times
K's Works Design viewtopic.php?f=35&t=6962
PreviousNext

Return to Car Design Sharing Forum

Who is online

Users browsing this forum: No registered users and 0 guests