Replica Performance Production Engines
Posted: Mon Sep 28, 2015 3:42 amThis is a thread where I will share my replica engines from time to time.
First up
Ford 5.0 DOHC Twin Turbo Coyote V8
Features 2 74 mm ball bearing turbos, Water-Air IC, I Beam Titanium Connecting Rods, Forged Pistons.
Turbos
74 mm compressor wheel
70mm turbine wheel
1.40 A/R
Fuel AFR
10.0:1
Boost PSI
35.5 PSI @ 8600 RPM
Max PSI 44.10
Compression Ratio
11.0:1
Multi port fuel injection
8800 RPM Rev Limiter
1619 HP @ 8700 RPM
1019 TQ FTLB @ 7300 RPM
Any comments/suggestions or requests, please feel free to leave them at the bottom.
First up
Ford 5.0 DOHC Twin Turbo Coyote V8
Features 2 74 mm ball bearing turbos, Water-Air IC, I Beam Titanium Connecting Rods, Forged Pistons.
Turbos
74 mm compressor wheel
70mm turbine wheel
1.40 A/R
Fuel AFR
10.0:1
Boost PSI
35.5 PSI @ 8600 RPM
Max PSI 44.10
Compression Ratio
11.0:1
Multi port fuel injection
8800 RPM Rev Limiter
1619 HP @ 8700 RPM
1019 TQ FTLB @ 7300 RPM
Any comments/suggestions or requests, please feel free to leave them at the bottom.