FAQ  •  Login

[Engine Request] BMW M60B30

<<

dave47561879

Supercharged
Supercharged

Posts: 2

Joined: Sat May 10, 2014 2:51 pm

Cars: 1995 BMW 530i V8 5spd

Post Thu Jul 09, 2015 12:54 pm

[Engine Request] BMW M60B30

Someone on here already did it, but was unable to post it. Is there anyone else that has recreated this engine/anyone that can? I would like to know what settings they used.
<<

MadamVastra

User avatar

Posts: 34

Joined: Sun Jun 28, 2015 9:49 pm

Location: South-East Wales, Great Britain

Cars: Landrover Freelander 2 SD4 GS

Post Tue Jul 14, 2015 6:35 am

Re: [Engine Request] BMW M60B30

paul_wms - BMW M60.zip
(74 KiB) Downloaded 230 times
Hi, here is my attempt at this engine. I used information that was available on the internet. The only discrepancy is the torque. Whereas the real engine produces 215 hp and 214 ft/lb of torque I can replicate the power but the torque is down at 188 ft/lb.

M60B30 1992 - 96
Aluminium block/head. DOHC. 32v VCT Forged rods Cast crank

Bore 84mm Stroke 67.6mm Compression 10.5:1 RPM 6500 215 hp 214 ft/lb

M60B40 1992 -96
Aluminium block/head. DOHC VCT ?Billet crank

Bore 89mm Stroke 80mm Compression 10.0:1 RPM 6500 282 bhp 295 ft/lb

I haven't tried to replicate the B40 but these are the figures you'll need if you want to have a go. Unfortunately the 80mm stroke is slightly too much different to the 67.6mm of the B30 for the game to accommodate. The closest match is around 79.6mm.

I hope this is ok for you. :D
Williams Motor Corporation of Great Britain
Marques: Hillman, WMC, Telos Automotive, Prydonian Motorsports
Taking Heritage Into The Future
Company Website: http://www.automationhub.net/company-ca ... ompany/263
Company ID: #2005999
<<

dave47561879

Supercharged
Supercharged

Posts: 2

Joined: Sat May 10, 2014 2:51 pm

Cars: 1995 BMW 530i V8 5spd

Post Wed Jul 22, 2015 2:24 am

Re: [Engine Request] BMW M60B30

MadamVastra wrote:
paul_wms - BMW M60.zip
Hi, here is my attempt at this engine. I used information that was available on the internet. The only discrepancy is the torque. Whereas the real engine produces 215 hp and 214 ft/lb of torque I can replicate the power but the torque is down at 188 ft/lb.

M60B30 1992 - 96
Aluminium block/head. DOHC. 32v VCT Forged rods Cast crank

Bore 84mm Stroke 67.6mm Compression 10.5:1 RPM 6500 215 hp 214 ft/lb

M60B40 1992 -96
Aluminium block/head. DOHC VCT ?Billet crank

Bore 89mm Stroke 80mm Compression 10.0:1 RPM 6500 282 bhp 295 ft/lb

I haven't tried to replicate the B40 but these are the figures you'll need if you want to have a go. Unfortunately the 80mm stroke is slightly too much different to the 67.6mm of the B30 for the game to accommodate. The closest match is around 79.6mm.

I hope this is ok for you. :D


I tried doing it myself, but couldn't get it just right. Thank for the files!

Return to Engine Sharing Forum

Who is online

Users browsing this forum: No registered users and 0 guests

cron