[Engine Request] BMW M60B30
Someone on here already did it, but was unable to post it. Is there anyone else that has recreated this engine/anyone that can? I would like to know what settings they used.
Posts: 34
Joined: Sun Jun 28, 2015 9:49 pm
Location: South-East Wales, Great Britain
Cars: Landrover Freelander 2 SD4 GS
MadamVastra wrote:Hi, here is my attempt at this engine. I used information that was available on the internet. The only discrepancy is the torque. Whereas the real engine produces 215 hp and 214 ft/lb of torque I can replicate the power but the torque is down at 188 ft/lb.
M60B30 1992 - 96
Aluminium block/head. DOHC. 32v VCT Forged rods Cast crank
Bore 84mm Stroke 67.6mm Compression 10.5:1 RPM 6500 215 hp 214 ft/lb
M60B40 1992 -96
Aluminium block/head. DOHC VCT ?Billet crank
Bore 89mm Stroke 80mm Compression 10.0:1 RPM 6500 282 bhp 295 ft/lb
I haven't tried to replicate the B40 but these are the figures you'll need if you want to have a go. Unfortunately the 80mm stroke is slightly too much different to the 67.6mm of the B30 for the game to accommodate. The closest match is around 79.6mm.
I hope this is ok for you.
Return to Engine Sharing Forum
Users browsing this forum: No registered users and 0 guests