Page 8 of 9
Re: Maximum power (3600hp+)
Posted:
Thu Dec 26, 2013 1:57 amby Reaper392
TampaPowers wrote:I'm up to 2500hp 2500nm again... some MTBF left. Is going past 3000 still possible or am i wasting my time?
having just bought the full game i can tell you that going past 3600bhp is definitly possible with 0mtbf. whether its possible with an engine that will actually go anywhere is another question
Re: Maximum power (3600hp+)
Posted:
Fri Dec 27, 2013 2:55 amby Deskjetser
Reaper392 wrote:having just bought the full game i can tell you that going past 3600bhp is definitly possible with 0mtbf. whether its possible with an engine that will actually go anywhere is another question
They changed this in the last major update I believe. It used to be possible to achieve 3600hp+ with a positive MTBF, but now I doubt you can get above 3500 with an MTBF above 0.
I built this before the last major update;
Re: Maximum power (3600hp+)
Posted:
Fri Dec 27, 2013 4:46 amby Reaper392
3500bhp? i'm struggling to get something that runs over 2950bhp
Re: Maximum power (3600hp+)
Posted:
Mon Dec 30, 2013 3:09 pmby CCB
Inline 4 (5.4L) 1548.5 HP 1100 FT-LB
Inline 6 (8.1L) 1839.2 HP 1905.8 FT-LB
FlatPlane (662.3 CI) 3525.5 HP 2622 FT-LB
Can anybody beat that!?
Re: Maximum power (3600hp+)
Posted:
Tue Dec 31, 2013 12:53 amby Reaper392
If the MTBF is 0 then I can definitely beat the V8 (3710bhp), and I think I can beat the other two as well but I cant remember the exact figures. If you have a positive MTBF then you've beaten me by a mile on all three counts
Re: Maximum power (3000hp+)
Posted:
Tue Dec 31, 2013 1:34 amby CCB
oldgreg wrote:Juno8 wrote:6 Bar boost, 4 Turbo Chargers and DevMeth
And "Ultra Heavy Duty" bits for the bottom end.
Ultra Heavy Duty-1 lb per piston Low RPM Extremely High Torque
The Ultra Heavy Duty Pistons couldn't rev over 4500rpm without Over 9000 NM of torque (JK)! Really over 4000Nm.
What about "Bulletproof Race Pistons"? They would be the same as Ultra Heavy Duty Pistons, but made of Titainium.
Bulletproof Race .5 lb per piston Extremely High RPM Extremely High Torque
Same for conrods.
Re: Maximum power (3600hp+)
Posted:
Tue Dec 31, 2013 6:13 amby Kubboz
My opinion is that if the cheat parts are introduced, they shouldn't even try to shoehorn wrong understanding of physics. (Titanium is NOT your uber magic material)
Just go for rainbow bottom end parts and say that it makes your car a nyan car. (Nyan car. Get it, Nyan car?). Also needs a nyan catalytic converter (or nyan cat in short), which actually adds power.
Re: Maximum power (3600hp+)
Posted:
Mon Jan 06, 2014 12:44 amby brock500r
Hi guys this is my first attempt at a big power animal we need stronger pistons to make more powers or compound boosting ? maybe VNT
Re: Maximum power (3600hp+)
Posted:
Sun Feb 02, 2014 4:47 amby CCB
Reaper392 wrote:If the MTBF is 0 then I can definitely beat the V8 (3710bhp), and I think I can beat the other two as well but I cant remember the exact figures. If you have a positive MTBF then you've beaten me by a mile on all three counts
How? Show me the setup!
Re: Maximum power (3600hp+)
Posted:
Sun Feb 02, 2014 4:51 amby CCB
Reaper392 wrote:I only have the demo so i can only submit NA I4s, but i was pretty proud of getting to 820.8bhp (612.1kW). Here's the upload if you want it:
Ps. does anyone know how to move the camera in the editor? I can change the angle but not the position it is focused on, and it seems to be focused quite far in front of the engine, hence taking the screenshot from the more boring side.
Also, to any eagle eyed person who noticed the impossibly high graphics memory usage, its like that because I'm using an old beta version from MSI afterburner
I cant change the angle, but I can make it zoom out. If you have a mouse, scroll to yourself.
Re: Maximum power (3600hp+)
Posted:
Sun Feb 02, 2014 4:54 amby CCB
XYReis wrote:Get on my level.
This engine requires so little maintenance it actually gives YOU 40000 bucks every year.
Also, imgur ruined the quality.
Send me the hack!
Re: Maximum power (3000hp+)
Posted:
Sun Feb 02, 2014 4:58 amby CCB
CCB wrote:oldgreg wrote:Juno8 wrote:6 Bar boost, 4 Turbo Chargers and DevMeth
And "Ultra Heavy Duty" bits for the bottom end.
Ultra Heavy Duty-1 lb per piston Low RPM Extremely High Torque
The Ultra Heavy Duty Pistons couldn't rev over 4500rpm without Over 9000 NM of torque (JK)! Really over 4000Nm.
What about "Bulletproof Race Pistons"? They would be the same as Ultra Heavy Duty Pistons, but made of Titainium.
Bulletproof Race .5 lb per piston Extremely High RPM Extremely High Torque
Same for conrods.
P.S. There need to be 4 turbo I4's and V8's because there is a person working on a 4 turbo 4.6 modular. Also, 1 turbo V8's , 3 turbo V8's, and twin turbo I4's and I6's.
Re: Maximum power (3600hp+)
Posted:
Fri Feb 07, 2014 1:45 pmby xtremeracer
Haha my top Hp is 1304 with a torque of 1267 and an MTBF of only 9720 lol
Re: Maximum power (3600hp+)
Posted:
Mon Feb 10, 2014 8:01 amby xtremeracer
Haha my highest Hp engine runs in at 3127, with an MTBF of only 4528, I got one at 3314 but it had an MTBF of 0!
Re: Maximum power (3600hp+)
Posted:
Fri Oct 03, 2014 2:55 amby 11muhammed11
I made an engine yesterday these are the stats:
Power: 3162 HP
Torque: 3177 NM
Redline 7700
Responsiveness 68,1
Loudness 47,2
Smoothness: 60,4
Reliability: 4,1
Required Cooling: 5420,5
Weight: 434,6
Size: 711x587x901
Service cost: 18135,84 per year
Emissions 15
Economy: 7,53 - 10022,2g/Kwh
Fuel Octane 96,4
I like to upload a picture but i am new here so i dont know how.
