automationgame.com

i guess im the first person trying to replicate VTEC

PS. red are actual and green are automation

D13B2
Displacement - 1343CC - 1343CC
Bore and Stroke - 75.0 mm × 76.0 mm - 75.0 mm × 76.0 mm
Compression - 9:1 - 9:1
Power - 74 hp at 6,300 rpm - 73.8 at 6,800rpm
Torque: 102 Nm at 3,100 rpm - 111Nm at 3300rpm
Valvetrain: SOHC, 16 valve - SOHC, 16 valve
Fuel Control - Single electronic carburettor PGM-CARB - Single carburettor

D15B2
Displacement - 1493CC - 1493CC
Bore and Stroke - 75.0 mm × 84.5 mm - 75.0 mm × 84.5 mm
Compression - 9:2 - 9:2
Power - ~88.5 hp at 6000 rpm - 89hp at 6,300rpm
Torque: 119 Nm at 4700 rpm - 133Nm at 3400rpm
Valvetrain: SOHC, 16 valve - SOHC, 16 valve
Fuel Control - OBD-O DPFI - Single Point Fuel Injection (actual car has Dual Point Fuel Injection)

D15B7
Displacement - 1493CC - 1493CC
Bore and Stroke - 75.0 mm × 84.5 mm - 75.0 mm × 84.5 mm
Compression - 9:2 - 9:2
Power - 102 hp at 5900 rpm - 102hp at 6,500rpm
Torque: 133 Nm at 5000 rpm - 140Nm at 3800rpm
Valvetrain: SOHC, 16 valve - SOHC, 16 valve
Fuel Control - OBD-1 MPFI - Multi Point Fuel Injection

D16Z6
Displacement - 1590CC - 1590CC
Bore and Stroke - 75.0 mm × 90 mm - 75.0 mm × 90 mm
Compression - 9:2 - 9:2
Power - 125 hp at 5900 rpm - 124hp at 7000rpm
Torque: 144 Nm at 5000 rpm - 154Nm at 4300rpm
Valvetrain: SOHC, 16 valve /w VTEC - SOHC, 16 valve /w VVL
Fuel Control - OBD-1 MPFI - Multi Point Fuel Injection

Can you post the LUA files for download? I'd like to muck around with these.

d16z6

can somebody tell me where they are?
i would love to post screenshots aswell

EDIT: actual D16Z6 has fuelcut set at ~7400 and redline starts at 7200

i drive one, i know