Low and super low horse power

[azel_wolf]

I've seen a high horse power thread now I am making a low and super low HP thread I'm talking about sub .5 liter engines that can run it's whole RPM range 2000-12000 and still work. I'll try and upload some of my attempt soon i'd love to see 100 HP or less that can still run.

[Killrob]

Have you watched my Youtube video on this? http://www.youtube.com/watch?v=go0dtHPDSIY (second part)
Is this what you want? I think Kubboz currently holds the record with below 10 kW
Cheers!

[Kubboz]

Oh, it's not below 10 kW.
The lowest I can get to is 10.4 kW, as you can see in the attachment.
By lowering cam profile by 1, I can get it to 10.1 kW, but it's debatable if it actually reaches the 12000 RPM limit.

[loady740]

the lowest i ever got with an engine was .1 hp and .4 ft-lbs of torque but the rev-limiter was set to 2000 rpm so.....

[armandkat]

the lowest i ever got with an engine was .1 hp and .4 ft-lbs of torque but the rev-limiter was set to 2000 rpm so.....

I made a 0.0 hp... with a lifespan of less than 10 MRevs

[MAC_HATER]

i had an engine make 0.1KW - that said - it could only idle - the momen you put it on the dyno and it idled for a bit and then went FU**IN BANG!

not terribly reliable when the main feature of the engine is it explodes D:

[Hardnuta]

Not sure what you mean by working across the whole Rev limit, But here is my entry

http://www.youtube.com/watch?v=kRsUjdOT ... tube_gdata

[Killrob]

By "across the full range" we mean non-zero power at every RPM value. So the engine you filmed is not a "valid entry" as such, even though it does generate very little power

[Lastgameking]

Sorry, but what mean's MRevs, i now this is the unit for lifespan. But exactly. Miles for overhaul??

[Kubboz]

MRevs - Millions of Revolutions