Naturally Aspirated
Posts: 8
Joined: Wed Jun 26, 2013 10:18 pm
Location: Hamburg, Germany
Cars: Ford Focus MK1 1.6
Guide: How to Export Automation Engines to Assetto Corsa
https://www.youtube.com/watch?v=WX8EvV5LEr8
(1080P 60 FPS should be available soon)
(Note: It only works for Naturally Aspirated Engines. If u want to export a Turbo engine u wont have Turbo sounds ingame.)
Tools recommended:
"NotePad++"
So, first u go into this directory:
"C:\Users\YourName\Documents\My Games\Automation\Engines\Variants"
Then u search your engine that u want to export, in my case it's named "FAW 6-23 Prot. - 23 RS-24cd6e44-3559-11e5-8a51-74d435fa4fef"
Right Click on it and choose "Edit with Notepad++"
Now Scroll down until you see this:
For now Minimize this window and go to "Your Steam\Steamapps\Common\Assetto Corsa\content\cars\Car you want to edit\data" But is has to be a Downloaded Car.
Look for the "engine.ini" file and right click on it and choose "Edit with Notepad++" again. (Maybe u want to make a backup first if you would like to have the original engine files back.)
Here in this File u can change the rev limiter and the idle rpm in my case it's 8800rpm / 850 rpm.
Now u have to change the Turbo "Max_Boost" to 0.0 and Wastegate to 0.0 so there is no Turbo activated.
further down there should be this section(Not on the screenshot):
- Code:
[DAMAGE]
TURBO_BOOST_THRESHOLD=2.0 ; level of TOTAL boost before the engine starts to take damage
TURBO_DAMAGE_K=5 ; amount of damage per second per (boost - threshold)
RPM_THRESHOLD=9200 ; RPM at which the engine starts to take damage
RPM_DAMAGE_K=1 ; amount of damage per second per (rpm-threshold)
I Think this is self explaining because everything is explained to the Right.
Save and close this File now after u changed everything u need.
Search the "Power.lut" file and choose "Edit with Notepad++"
This is where we need our Engine File again.
Now this is pretty simple. On the left is the RPM and on the right the torque in Nm like in the Automation file.
now only transfer the torque from the Automation Engine file to the Assetto Corsa Power.lut file.
When you are done only Save and close the "Power.lut" file and you are ready to Race.